Falcon Foam - Special Shapes


	Specifications All Specs\|This Product Codes & Compliances Warranty Installation Case Studies

FALCON FOAM Special Shapes for Exterior Insulation and Finish Systems (EIFS) are a cost-effective insulating substrate for exterior wall finishes. Compatible with virtually all exterior insulation systems, FALCON FOAM Special Shapes can be custom cut to meet unique architectural designs, adding architectural interest while substantially increasing the thermal efficiency of the structure. High R-value, moisture resistance and ease of handling make FALCON FOAM insulation the underlying quality in new construction and retrofit applications.

FalconFoam Typical Physical Properties

CODES & COMPLIANCES

Federal Specification ASTM C 578-01 Standard specification for rigid, cellular polystyrene thermal insulation.
ICC ER-4059 International Code Council Evaluation Report
Underwriters Laboratories Inspection Report File#R18415 Class A Roof systems(built up and single ply)

Spec this Product

RECOMMENDED USES
In Exterior Insulation and Finish Systems (EIFS) - a non-load bearing exterior wall cladding system consisting of an insulation board, and adhesive and/or mechanical attachment of the insulation board to the substrate, and an integrally reinforced base coat on the face of the insulation board, a protective finish applied to the surface of the base coat and applicable accessories that interact to form an energy efficient exterior wall.

WARRANTY
20 Year Limited Thermal Warranty

In response to valid concerns of building designers regarding thermal efficiency of various construction assemblies and the long-term insulating value of roof insulation, Falcon Foam (a division of Atlas Roofing Corporation) offers a 20-year, limited thermal warranty. The Falcon Foam EPS (Expanded Polystyrene) Limited Thermal Warranty places Falcon Foam EPS (Expanded Polystyrene) products above all others and supports the building owner, designer and contractor by backing up thermal performance. This warranty is available to the building owner at the time the building is completed and is transferable to any subsequent owner for the duration of the 20-year period.
Falcon Foam Warranty

INSTALLATION
Installation Exposure — Following each day of application, all exposed insulation should be covered and temporarily sealed from moisture in accordance with good building practices. Insulation exposed to moisture should be replaced or thoroughly dried prior to application of finish or covering materials.

SALES OFFICES
Byron Center, Michigan

Colors:
Perryville, Missouri

Colors:
Sales Offices

[TOP]

Features & Benefits

Outstanding Thermal Efficiency

Superior Moisture Resistance

Lightweight — for easier hoisting, handling and
installation

Environmental Compatibility — no HFCs or CHFCs and is recyclable

Available in a Variety of Panel Sizes and
Thicknesses